Chick Transportation Trailer

Dimensions (mm) Weights (kg)
5.WHEEL HEIGHT 1150 CURB WEIGHT
LOWBED 66 KINGPIN CAPACITY 11500
WHEELBASE (WB) 7470 AXLE CAPACITY 24000
OUTER LENGTH 13540 TOTAL WEIGHT 35500
INTERIOR NET LOADING AREA 13370  

GENİŞLİK 2600
İÇ NET GENİŞLİK 2470
İÇ NET YÜKSEKLİK 2650

CHASSIS
It is produced in an automatic submerged arc welding machine in the shape of an “I” profile using high-strength ISO Standard imported steel (MC700). Two chassis side members are connected to each other via crosses. Yıldız Trailer designs and produces vehicle chassis with the strength to enable them to travel with full load in our country and similar road conditions.

AXLES
3×9 tons carrying capacity, disc brakes, fully automatic front lifting system, air suspension system

TIRES AND RIMS
6 +1 385/65 R22.5 tires, 22.5×17.5 offset steel rims

MECHANICAL FOOT
Imported 24 tons capacity double speed mechanical foot.

BRAKE SYSTEM
2S/2M Brake system in compliance with regulations

ELECTRICAL SYSTEM
24 V lighting, parking, brake, signal, side clearance lamp and reflector system in accordance with the regulation.

PAINT
The chassis passes through a complete sandblasting tunnel and the surfaces are cleaned with the sandblasting method and prepared for painting. After the trailer is primed in the paint booth, the final paint is applied in the desired color and baked.

PANELS
The interior and exterior surfaces are produced from a white material called GRP (Glass Fiber Reinforced Polyester), which does not require subsequent painting, does not become matte or yellowing, and is resistant to external influences and chemicals. Insulation is provided by polyurethane with a density of 42 kg/m3 between the two FRPs.

BASE
The base is made of water-resistant (Fin) plywood placed between the upper and lower GRP. There are fresh air guiding channels on the floor and an infinitely perforated FRP sheet on the channels.

CEILING
There are turbo ventilation fans on the ceiling to remove dirty air.

CONDENSATION CHAMBER
There is a clean air condensation room at the front and the necessary blower fans and axial fans in the room.

FRONT PANEL AIR INTAKE
Aluminum grille on the front panel for fresh air intake

HEATING SYSTEM
Vehicle interior heating is provided by the Vebasto system.

COOLING SYSTEM
The cooling system required for hot climates is provided by a cooling device installed in front of the trailer and an infinite hole system with a suspended ceiling system installed on the ceiling of the box.

BACK DOOR
double wing door

SIDE DOORS
2 side doors on the right and 2 on the left

LIVE CHICK TRANSPORTATION SYSTEM IS OPTIONALLY PRODUCED AS A MANUAL SYSTEM OR AUTOMATION SYSTEM.

 

STANDARD ACCESSORIES

All in compliance with the necessary regulations,

Rear Movable bumper
spare wheel carrier 2 pieces
ramp support wedge 3 pieces
quarter fender 2 pieces
Tool chest 1 piece
Food chest 1 piece
Folding side guard 2 pieces
Fire extinguisher cabinet 1 piece
Wheel Chock 1 piece
30 lt water tank 1 piece
Reflector applications