Chick Transportation Body

Panel Thicknesses Truck Group Pickup Truck Group
SIDES 65 mm 65 mm
ROOF 100 mm 65 mm
FLOOR 120 mm 80 mm
DOORS 80 mm 75 mm
FRONT WALL 95 mm 65 mm

PANELS
The interior and exterior surfaces are produced from a white material called GRP (Glass Fiber Reinforced Polyester), which does not require post-painting, does not become dull or yellow, and is resistant to external influences and chemicals. Insulation is provided by polyurethane with a density of 42kg/m3 between the two FRPs.

BASE
The base is made of water-resistant (Fin) plywood placed between the upper and lower GRP. There are 5 rows of fresh air guiding channels on the floor and an infinitely perforated FRP sheet on the channels.

CHASSIS
The chassis, specially formed from S355 Quality Sheet Metal, consists of a welded construction reinforced with intermediate crosses. Bumper, mudguard, toolbox etc. It is connected to the chassis with detachable connections.

HEATING SYSTEM
Interior heating is provided by the vebasto system.

COOLING SYSTEM
The cooling system required for hot climates is provided by a cooling device installed in front of the trailer and an infinite hole system with a suspended ceiling system installed on the chassis ceiling.

VENTILATION SYSTEM
The ceiling ventilation system is provided by turbine fans.

CONDENSATION CHAMBER
Fresh air is allowed into the case thanks to the condensation chamber air vent located on the front of the case. Thanks to the blower and axial fans, fresh air is sent into the case.

STANDARD FEATURES
CEILING INTERIOR LIGHTING 2 RIGHT, 2 LEFT SIDE DOORS
EXTERIOR LIGHTING STAINLESS SHELTERS ON THE SIDE DOORS
MUDGUARDS
BICYCLE RAILWAY ELECTRICAL PANEL
TOOL CHEST DOUBLE WINGS REAR DOOR
4 FANS ON REAR STAIRS 4 FANS ON REAR DOORS
TSE APPROVED BODY PROJECT
REAR AND SIDE STRIP REFLECTORS